What should i do if the iPhone 6 Plus screen or iphone 6s plus is broken? Now I will share with you the guide about removal and replacement screen. if your iPhone 6 Plus in the United States, you can pay $ 29 by repair with Apple official, if the device is out of warranty, must pay $ 149. Now you can repair or screen replacement by yourself, you can refer to this tutorial.
iPhone 6 Plus Replacement LCD Screen Video Guide
Accidents happen. If your screen gets cracked, we can help.
First you must get a 5.5” full lCD display assembly at Amazon for price $27.99 and iPhone 6S Plus Screen for price $31.99, the component is equipped with a front camera, earpiece and sensor cable for easy service replacement.
Compatibility:This part will only compatible with an iPhone 6 Plus, but not an iPhone 6, 6s or 6s Plus. Please make sure you identify your iPhone correctly before purchase.
All the tool kits required to replace the screen are included in the package (spudger, screwdrivers, suction cup, and opening tool, no more extra items need to buy.
iPhone 6 Plus Screen Replacement tutorial:
Step 1: Power off and disassemble screen
A. Power off your iPhone before beginning disassembly.
B. Remove the two 3.6 mm Pentalobe screws next to the Lightning connector.
C. Using a suction cup and plastic opening tool, gently pry the rear case down away from display.
D. Open the iPhone by swinging the home button end of the front panel assembly away from the
rear case, using the top of the phone as a hinge.
Note: Don’t open the display to over 90º angle or the connectors might be damaged.
Step 2: Disconnect battery cable
A. Remove the following Phillips screws from the battery connector bracket:
- One 2.3 mm screw
- One 3.1 mm screw
B. Remove the metal battery connector bracket from the iPhone.
C. Use a plastic opening tool to gently pry the battery connector up from its socket on the logic
Note: Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
Step 3: Remove the front panel assembly, and swap the home button if you want to keep the touch ID function
When you iPhone screen replacement done, it maybe have some prolem, such as screen is blank/not lighting up after installed, screen has been installed and worked fine for a few days/weeks, but the touch function is not working well, phone keeps rebooting after the screen is installed and the home button does not work, get the solution by contact the seller. Please note, we are not the seller.